| |
IntroductionThe Flushglaze is a fixed flat glass skylight, the concept is based on an innovative design to achieve maximum daylight, longevity and high performance. The Flushglaze low profile system is based on car windscreen technology, the glass being structurally bonded and triple sealed making it ideal for flat roof applications. Keeping water ponding and condensation risks to a minimum by the elimination of internal flashings and metalwork. Flushglaze units are suitable for flat and sloped rooflight applications. The rooflight can be extended to any length by linking sections together and sealing between the units, framed opening sections of the Visionvent can be added for ventilation and access. Standard and bespoke sizes are available. Features
Options
|
|
Flushglaze® Technical Data
Recommended minimum kerb height | 150mm (to avoid invalidating roof guarantees) |
Minimum kerb thickness | 75mm |
Minimum pitch on kerb | 5 degrees |
Minimum glass size | 400mm x 400mm (smaller can be made but it's no longer a meansof obtaining effective daylight) |
Standard glass specification | 28mm DGU; 6mm toughened outer, 16mm black silicone sealed spacer, 6mm Low E coated toughened inner pane |
Maximum single pane glass kerb size (Four edge supported) | 3500mm x 1500mm span @ up to 5° kerb pitch |
Oversized unit | 3500mm x 1500mm (for multiple panes). Larger multi-pane spans will use back to back angle supports. Largest length for single frame = 4100mm (this is the extrusion length) |
Standard sizes (Outside Kerb sizes) | 1000mm x 1000mm, 1000mm x 1500mm, 1000mm x 2000mm |
Walk-on Flushglaze® Technical Data
Recommended minimum kerb height | 150mm (to avoid invalidating roof guarantees) |
Recommended minimum kerb height | 150mm (to avoid invalidating roof guarantees) |
Minimum kerb thickness | 75mm |
Recommended pitch on kerb | 5 degrees |
Minimum glass size | 400mm x 400mm (smaller can be made but it's no longer a meansof obtaining effective daylight) |
Standard glass specification | 43.5mm DGU; 21.5mm outer pane (heat soaked laminated/toughened, 10 x 1.5 x 10), 16mm black spacer, 6mm Loe E coated inner pane |
Maximum single pane glass kerb size | 1200mm span x 2500mm (as a rule 3m&sup5; is possible as a maximum - e.g. 16500mm x 1850mm would be possible as a limit, however lengths of more than 3500mm may not be possible) |
Oversized unit (Over 3m²) | Increase in glass specification to 12 x 1.5 x 12 outer pane, 16mm black spacer, 6mm Low E coated inner pane, multi-panes can be used however back to back support angle will be placed at glass joints. |
Standard sizes(Outside kerb size) | 1000mm x 1000mm, 1000mm x 1500mm, 1000mm x 2000mm |